Help guests find the right person
Give staff a bold STAFF print and exhibitors their own strap color. Use the event logo on both so the lanyards look like one set.
Full-color polyester lanyards
Custom Lanyards
Make your crew easy to spot.
Print your colors, logo, or team name. Then choose the strap and hardware that fit your badges.
- 15, 20, or 25 mm
- Outside & inside print
- Five metal attachments
Made for the way you work
One lanyard can do a different job for each group.
Build around the ID people already use
Start with the existing badge or holder. If people regularly hand over an ID or use it at a reader, consider a detachable buckle above the clip.
Make roles readable at a glance
Pair a short role name with a contrasting strap color. Share any organization or venue requirements with your hardware request.
01 / Material & printing
Decide what each side should show.
Full-color heat transfer on polyester gives you room for a repeating logo, a multicolor pattern, or a role name that reads at a glance. Pick a standard color or send a custom color reference for either side.
Plan how it reads when worn. Show which way text should read on each side of the neck. If a logo must sit near the badge or line up on both faces, flag that when you send the artwork.
02 / Width & length
Choose a width that fits your artwork.
Picture your logo running down the strap at its actual size. Check the smallest lettering and how much space it needs on both sides.
Strap length
- 900 mm35.43 in laid flat
- Approx. 450 mm17.72 in folded
Both measurements describe the same strap, excluding hardware. The finished drop depends on how the lanyard is assembled and which hardware you choose.
15 mm ≈ 0.59 in
For a short name or small mark repeated along the strap. Simplify fine lettering so it stays readable.
20 mm ≈ 0.79 in
For an event name or a logo with a short line of text. Leave space between repeats.
25 mm ≈ 0.98 in
For larger lettering, a more detailed logo, or a pattern you want people to notice from farther away.
03 / Hardware
Two decisions make the hardware easier to choose.
First decide how the strap should open. Then choose the metal attachment that fits your badge slot, holder, or keys.
Metal Clip Only
A continuous neck strap with the attachment at the bottom. Start here for a badge people put on at check-in and wear through the day.
Back-of-Neck Breakaway
The neck connector can separate when the strap is pulled. If your organization specifies a breakaway connector, share its requirements so we can review your request.
Detachable Lower Buckle
Release the buckle near the bottom by hand to remove the badge or keys. The neck strap can stay on while you use or hand over the attachment.
Breakaway + Detachable
Choose both when you need a breakaway connector at the neck and a separately removable attachment at the bottom.
Metal attachments
Match the clip to the slot or loop.
- Lobster ClipA spring-gate clasp for a compatible ring or slot.
- J-HookA hook-shaped attachment. Check that its opening fits your badge or holder slot.
- Bulldog ClipA clamp that grips a compatible badge or holder edge.
- Oval HookAn oval-shaped attachment. Check the opening against the slot or loop you plan to use.
- Key RingA split ring for keys or other compatible loops.
Badge fit checklist
Check the badge before you pick the clip.
- Measure the card. Note its width and height and whether it’s vertical or horizontal.
- Check where the clip goes. Measure the slot or loop and share a close-up so we can review the fit.
- Count holders separately. Tell us how many vertical or horizontal holders you need for each design.
Product videos
See custom lanyards in action.
Compare how printed lettering reads on the strap and see the clips and attachments up close.
0:57
Printed Lanyards and Attachments
See the strap and its printed message, then take a closer look at the hardware.
2:09
Team Lanyard Printing
See examples of printed team lanyards and how the name reads along the strap.
1:02
Lanyard Fit and Clip Details
See a lanyard being worn, with a close-up of the metal clip and the printed strap.
1:11
Lanyard Printing and Swivel Clip
See the custom lettering and how the swivel snap hook opens.
04 / Artwork
Send artwork we can lay out on the strap.
A clear file and a few placement notes help us review your design for the width and hardware you choose.
Send your original logo
Use a vector file if you have one. For photos or raster graphics, send the clearest original available. Include exact text and capitalization.
Mark each side and direction
Label the outside and inside designs. If a logo needs to face a certain way when worn, sketch its placement on the left and right lengths of the strap.
Share your color references
Specify the background and artwork colors for each side. Include a Pantone reference if you have one. Screen and printed fabric colors can look different.
Check the visible area. Leave room near seams and hardware so important text or logos stay visible. See the artwork and color guide.
From idea to order
Build a lanyard for each group.
Start a separate design for each group that needs different artwork, hardware, or badge holders. Set the quantity for each design in the customizer.
Build each lanyard design
Choose the strap width, clip, buckle, and any badge holders. Add your artwork and enter the quantity for each design.
Review your design and price
Check both sides of your design and review the hardware and price. Add eligible configurations to your cart. If a configuration needs a quote, submit it from the customizer.
Plan production and transit
We’ll review production and transit separately. Share your delivery ZIP code and the date you need the lanyards in hand.
Our factory in Guangdong was established in 2004.
About DailySprBefore packing, we check strap dimensions, print orientation, stitching, hardware, and counts against the order details.
Example request
One event, three lanyard setups
Here’s how a team might break down a request by role.
- 500 attendee lanyards · 20 mm · white logo on navy · J-hook · 500 vertical holders
- 200 exhibitor lanyards · 20 mm · teal EXHIBITOR artwork · oval hook · 200 vertical holders
- 100 staff lanyards · 25 mm · blue STAFF artwork · detachable buckle and lobster clip · 60 horizontal holders
Delivery · ZIP code 60601 · In hand by May 7 · Event May 15
Example quantities for planning. We confirm available combinations and minimums when reviewing your request.
What to have ready
- Quantity for each design and setup
- Strap width, side-by-side artwork files or placement notes, and color references
- Clip, buckle setup, badge dimensions, and holder quantity
- Delivery ZIP code, event date, and the date you need the order in hand
- Any packing or labeling instructions for each group
Before you order
Questions about your lanyards?
Check your artwork, badge fit, hardware, and quantities before placing your order.
Can I use different designs on the outside and inside?
Yes. Label each design by side, or specify the background and artwork you want for each. Let us know if placement needs to line up at a particular point.
How long is the strap?
The webbing is 900 mm (about 35.43 in) laid flat, or about 450 mm (17.72 in) folded. These measurements exclude hardware. The assembled drop varies with the connection and buckle setup.
How do breakaway and detachable buckles work?
A breakaway connector can open at the neck when the strap is pulled. A detachable buckle lets you remove the lower attachment by hand. Share any requirements for your setting so we can review your request.
Will the clip fit my badge?
It depends on the slot or loop and the clip opening. Send the dimensions or a clear photo of the badge or holder so we can review how the parts connect.
Where will my logo sit when the lanyard is worn?
Send a sketch of the placement you want on the left and right lengths of the strap. If an exact spot matters, flag it so we can review how cutting and stitching will affect the position.
Can I add badge holders?
Yes. Choose vertical or horizontal badge holders in the customizer and enter the number you need. Check your card dimensions before choosing a holder.
Can one order include several designs or hardware setups?
List the artwork, width, clip, buckles, and quantities for each setup. We’ll review the configurations and any minimum quantities that apply.
What’s the minimum order and how much will it cost?
Your minimum quantity can change with strap width and color choices. Build each configuration in the customizer to see its minimum and check whether online pricing is available.
Can the lanyards arrive by my event?
Send your delivery destination, event date, and the date you need the order in hand. We’ll review your artwork, setup, production, and transit before confirming timing.
Ready to plan your lanyards?
Design your custom lanyards.
Choose your strap, clip, and any badge holders. Add your artwork and quantity to see pricing for eligible orders.